Author - China molded rubber silicone products factory

Production equipment and process of silicone hose or silicone tube

Production equipment and process of silicone hose or silicone tube
Production process of silicone tube:
1. Rubber-mixing-drying-high temperature treatment-vulcanization treatment-packaging after drying

2. Put the raw rubber of collagen material into the mixer to mix, add the silicone vulcanizer to mix evenly, then divide into strips, put the screw extruder (silicone extruder) to extrude from the inside of the specifications of the mold, can extrude from top to bottom, can also be parallel extruded through oven vulcanization, the temperature varies from 300 […]

2019年5月27日
By General, News , , , , , ,
Read more...

What are the storage methods of silicone rubber products?

What are the storage methods of silicone rubber products?
Silicone rubber products storage can pay attention to the following points:
1. Packing well, dustproof and antioxidant
2. Keep ventilated, dry and mildew-proof
3. Temperature suitable attention period
4. Keep silicone rubber parts at room temperature to avoid illumination

 

2019年5月27日
By News ,
Read more...

Do you know why the customized rubber products are not lack of material and smooth surface?

Do you know why the customized rubber products are not lack of material and smooth surface?
Customized rubber products look beautiful and the key to accurate size is the mold, if a rubber product mold opened perfectly, then made the product feel good.

QIGUANG RUBBER has its own mold department and five designers who have worked for more than 6 years. They can understand the customer’s intention perfectly. Secondly, our mold material is 100% 304 stainless steel, open after a long […]

2018年10月18日
By News ,
Read more...

The kinds of 3M adhesive of our bumpon

How to judge the quality of 3M double-sided adhesive?
The quality of 3M double-sided adhesive has a great influence on the use of bumpons.  All the silicone bumpons produced by our company are made of imported 3M double-sided adhesive. The main models are: 3M9448A, 3M200MP, 3M467, 3M9677, T4000.

 
3M double-sided adhesive is generally composed of three parts: base material, adhesive and release paper. Common double-sided adhesive is mainly oil and water adhesive, 3M double-sided adhesive is mostly acrylic acid, so 3M double-sided […]

2018年10月15日
By News , ,
Read more...

What is rubber vulcanizing mold ?

The mold is a model rubber vulcanization tool has a certain plasticity of rubber, after prefabricating a certain shape or weighing a certain quality, filled or directly injected into the mold cavity, after pressure heating vulcanization, can be obtained the desired shape and size of the customized rubber product.
 
Whether the structure of the mold is reasonable or not directly affects the operation, production efficiency and the technical specifications of the parts in the molded production, and also directly affects […]

2018年10月11日
By News , ,
Read more...

What kinds of molded rubber products do you have?

What kinds of molded rubber products do you have?
Molded Rubber products can be divided into the following categories according to their use conditions and uses.

Sealed products   There are many kinds of rubber sealing products, such as oil seal (lip seal of rotating shaft), O-ring, reciprocating motion seal ring of various sections [lip seal ring (V-ring, L-ring, Y-ring, U-ring, J-ring), rectangular seal ring, angle seal ring, special shape seal ring], etc. Sealing gasket, sealing strip, diaphragm, valve cushion, etc.
Shock absorber products   Shock […]

2018年9月26日
By News , , , , , ,
Read more...

What is molded rubber product?

 What is molded rubber product?
Molded Rubber products are also called rubber mouldings. The model is what we usually mould.
Molded Rubber products, usually refer to the rubber products formed in the mold cavity and vulcanized
Almost all rubber products must be moulds through corresponding molds. However, it does not mean that all rubber products can be called rubber model products. Generally speaking, molded rubber products are in addition to tires, hose, latex, footwear and other rubber products to be vulcanized in the mold.
The molded […]

2018年9月21日
By General ,
Read more...

New rubber products website

New rubber products website
To make our website look better on smartphones or tablets, we recently launched a new website. This website looks great on any size screen. Adaptive menu and drop-down list also make navigation easy on any device.
We are very excited about the latest launch of the new website. A lot of content has been reprinted、
At Qiguang Rubber, we are proud to be able to take our expertise in molding rubber parts, in many different industries and applications. […]

2018年9月18日
By News , , , , , ,
Read more...

rubber silicone gasket of die cut and mold press technology comparsion

Traditional die-cutting is a cutting technology of silicone rubber gasket in the late processing. Die-cutting technology can make silicone rubber gasket into die-cutting plate according to pre-designed graphics for cutting, so that the shape of silicone rubber products is no longer limited to right angles. The traditional die-cutting knife is combined into die-cutting plate according to the design requirement of product. Under the action of pressure, the silicone rubber dense sheet is cut into the desired shape or cutting […]

2018年9月13日
By News , , , , , , , , ,
Read more...